Highway U Post Roll Forming Machine
Description
We had experience of Russian type Guardrail, there are four lines totally:① two wave guardrail roll forming machine, ② U post roll forming machine,③ connection punching line and ④end wind punching line.
This U Roll Forming Machine can be designed for thickness 4-5mm, it is widely used as post of guardrail. We use forged iron stands(see picture) and gearbox driving to make sure this machine can longly work in a stable situation.
The flow chart of U post roll forming machine:
Hydraulic decoiler-Leveling-Punching-Roll forming machine-Cutting-Out table
Technical Specifications
|
Two Waves/Three Waves Highway Guardrail Roll Forming Machine |
|||
|
No. |
Item |
Specification |
Optional |
|
1 |
Suitable material |
Type:Galvanized Coil, PPGI, Carbon steel Coil |
|
|
Thickness(mm):4-5 |
|||
|
Yield strength: 250 – 550MPa |
|||
|
Tensil stress( Mpa):G350Mpa-G550Mpa |
|||
|
2 |
Nominal forming speed(m/min) |
15 |
Or according to your requirement |
|
3 |
Forming station |
10-12 |
According to your profile |
|
4 |
Decoiler |
Hydraulic decoiler |
|
|
5 |
Main machine motor |
Sino-German Brand |
Siemens |
|
6 |
PLC brand |
Siemens |
Panasonic |
|
7 |
Inverter brand |
Yaskawa |
|
|
8 |
Driving system |
Gearbox drive |
Chain drive |
|
9 |
Rollers’ materail |
Cr12 |
GCr15 or #45 Steel |
|
10 |
Station structure |
Forged Iron station |
Wall panel station Or torri stand structure |
|
11 |
Punching system |
No |
Hydraulic punching station or Punching press |
|
12 |
Cutting system |
Post-cutting |
Pre-cutting |
|
13 |
Power supply requirement |
380V 60Hz |
Or according to your requirement |
|
14 |
Machine color |
Industrial blue |
Or according to your requirement |
More Pictures
Highway U Post Roll Forming Machine Related Video: